Diamond DMD104SH 10" Shallow Subwoofer
Diamond DMD104SH 10" Shallow Subwoofer
Look no further if you are seeking a solution when challenged with space limitations for adding bass to your car audio system. The Diamond DMD shallow series subwoofers measure in with only 3 inches of depth and perform best in sealed enclosures performing just like a conventional full-size subwoofer but taking up less space. For optimum bass response, we recommend using two DMD shallow subwoofers in a narrow 1 cubic foot enclosure.
Product Details:
- 10" Dual 2 ohm DMD-SH Series Subwoofer
- Power Handling:
- Peak: 500 watts
- RMS: 250 watts
- Paper Cone
- Die Cast shallow frame for slim mount
- Oversized push terminals
- Black spider with woven tinsel leads
- Black ABS wrap around mounting gasket
- Vented pole for cooler operation
- Klippel Optimized motor and suspension symmetry
- High Temperature Voice coil
- 8.8 mm Xmax
- Single Stacked magnet motor structure
- Resonance Frequency (Fs): 48.5 Hz
- Sensitivity: 85.2 dB
- Recommended sealed box volume: 0.45 cubic feet
- Recommended ported box volume: 1 cubic feet
- Top-mount depth: 3"
- Cutout diameter: 9.13"
Subwoofer Size 10''
Nominal Impedance (ohms) 4Ω
SPL (db) 85.3
Re (Ω)[series] 6.0
Qms 5.0
Qes 0.70
Qts 0.62
Fs-Free Air Resonance (Hz) 40.8
Vas (Liter) 22.7
Sd (cm²) 0.036
BL (T*M) 16.4
Xmax - Inch(mm) 8.8
Cms (mm/N) 0.12
Mms (g) 123
Pwr (W) NOM/MAX 250/500
Total Diameter 10.87'' (276.0mm)
Mounting Diameter (inch/mm) 9.13'' (232.0mm)
Screw Hole Diameter 10.00" (254.0mm)
Mounting Depth 3.00'' (76.0mm)
Magnet Diameter (E) 5.69" (144.5mm)